View source for EE1004

[https://www.jedec.org/category/keywords/ee1004-v EE1004-v] is a JEDEC standard for [[SPD]] published May 2022. It is used in DDR4+ DIMMs, and has its own kernel module, <tt>ee1004</tt>, superseding the <tt>at24</tt> module used for AT24C02 EEPROMs. These are 512-byte devices accessed through a single I2C address; SMBus controls whether the upper or lower page is accessed.

==Binding EE1004==
Load the <tt>eeprom</tt> and <tt>ee1004</tt> modules (the former is still necessary for <tt>decode-dimms</tt> to function, but is deprecated). Determine which DIMMs are populated via addresses 0x50--0x57 on an SMBus-type I2C connection. Here, buses 0 and 1 are SMBus (using the <tt>i2c-piix4</tt> module).
<pre>
[schwarzgerat](0) $ i2cdetect -l
i2c-0	smbus     	SMBus PIIX4 adapter port 0 at 0b00	SMBus adapter
i2c-1	smbus     	SMBus PIIX4 adapter port 2 at 0b00	SMBus adapter
.....
[schwarzgerat](0) $ 
</pre>
Let's take a look across bus 0:
<pre>
[schwarzgerat](0) $ i2cdetect -y 0
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:                         08 09 -- -- 0c -- -- -- 
10: 10 11 -- 13 14 15 -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- 27 28 -- -- -- -- -- -- -- 
30: 30 31 -- -- 34 35 -- 37 -- -- 3a -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- -- -- 4a -- -- -- -- -- 
50: UU UU UU UU UU UU UU UU -- -- -- -- -- -- -- -- 
60: -- -- 62 63 64 -- -- -- 68 69 -- -- 6c -- -- -- 
70: 70 71 72 -- 74 -- 76 --                         
[schwarzgerat](0) $ 
</pre>
Here, we see my 8 DIMMs populating addresses 0x50 through 0x57. We now must associate these addresses with <tt>ee1004</tt>:
<pre>
[schwarzgerat](0) $ for i in `seq 0 7` ; do echo ee1004 0x5$i | sudo tee /sys/bus/i2c/devices/i2c-0/new_device ; done
ee1004 0x50
ee1004 0x51
ee1004 0x52
ee1004 0x53
ee1004 0x54
ee1004 0x55
ee1004 0x56
ee1004 0x57
[schwarzgerat](1) $ 
</pre>
At this point, <tt>decode-dimms</tt> ought be able to pull the EE1004 information. Try using <tt>decode-dimms --side-by-side</tt> for more compact presentation.

==External links==
* [https://en.wikipedia.org/wiki/Serial_presence_detect Serial presence detect] on wikipedia