Dank's Magnificent Bowls - revision history

Dank: /* Design */

2024-08-23T09:27:42Z

Design

← Older revision		Revision as of 09:27, 23 August 2024
Line 22:		Line 22:
	* How was the height selected?		* How was the height selected?
	** It's as low as we can go while still presenting a meaningful obstacle to a spool. Also, at 84mm it's exactly [https://www.youtube.com/watch?v=2IScILENqT0 420 layers] when printing a 0.20mm layer height.		** It's as low as we can go while still presenting a meaningful obstacle to a spool. Also, at 84mm it's exactly [https://www.youtube.com/watch?v=2IScILENqT0 420 layers] when printing a 0.20mm layer height.

			* Why circular magnets instead of bars?
			** They can be printed without supports.

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank at 09:52, 21 August 2024

2024-08-21T09:52:36Z

← Older revision		Revision as of 09:52, 21 August 2024
Line 4:		Line 4:

	OpenSCAD source is available on [https://github.com/dankamongmen/bowlsofwrath github].		OpenSCAD source is available on [https://github.com/dankamongmen/bowlsofwrath github].

			Dimensions: 220x232x84mm

	==Design==		==Design==
Line 19:		Line 21:

	* How was the height selected?		* How was the height selected?
	** It's as low as we can go while still presenting a meaningful obstacle to a spool. Also, at 84mm ~~(when using the honeycomb bottom),~~ it's exactly [https://www.youtube.com/watch?v=2IScILENqT0 420 layers] when printing a 0.20mm layer height.		** It's as low as we can go while still presenting a meaningful obstacle to a spool. Also, at 84mm it's exactly [https://www.youtube.com/watch?v=2IScILENqT0 420 layers] when printing a 0.20mm layer height.

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank: /* Design */

2024-08-21T09:51:15Z

Design

← Older revision		Revision as of 09:51, 21 August 2024
Line 17:		Line 17:
	* Why aren't the placards friction-bound at the bottom?		* Why aren't the placards friction-bound at the bottom?
	** We want them to be able to rotate forward upon removal of the top bolt, so that you can extract/insert spools without the placard falling out.		** We want them to be able to rotate forward upon removal of the top bolt, so that you can extract/insert spools without the placard falling out.

			* How was the height selected?
			** It's as low as we can go while still presenting a meaningful obstacle to a spool. Also, at 84mm (when using the honeycomb bottom), it's exactly [https://www.youtube.com/watch?v=2IScILENqT0 420 layers] when printing a 0.20mm layer height.

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank: /* Design */

2024-08-21T05:58:50Z

Design

← Older revision		Revision as of 05:58, 21 August 2024
Line 7:		Line 7:
	==Design==		==Design==
	* Why not put the struts inside, as opposed to outside?		* Why not put the struts inside, as opposed to outside?
	** The honeycomb is oriented. Supporting internal struts would mean either restricting their placement to a few of the combs, or no longer supporting other arbitrary external hookups.		** The honeycomb is oriented. Supporting internal struts would mean either restricting their placement to a few of the combs, or no longer supporting other arbitrary external hookups. Furthermore, there isn't enough room--two boxes fit within the width with essentially no give on either side.

	* Why no beveling on the top and bottom?		* Why no beveling on the top and bottom?
Line 14:		Line 14:
	* Why isn't the bottom honeycomb wall centered relative to the front and back?		* Why isn't the bottom honeycomb wall centered relative to the front and back?
	** So that it lines up with the honeycomb walls on the sides.		** So that it lines up with the honeycomb walls on the sides.

			* Why aren't the placards friction-bound at the bottom?
			** We want them to be able to rotate forward upon removal of the top bolt, so that you can extract/insert spools without the placard falling out.

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank: /* Design */

2024-08-19T10:33:18Z

Design

← Older revision		Revision as of 10:33, 19 August 2024
Line 11:		Line 11:
	* Why no beveling on the top and bottom?		* Why no beveling on the top and bottom?
	** None on the top so you can sit something atop it.		** None on the top so you can sit something atop it.

			* Why isn't the bottom honeycomb wall centered relative to the front and back?
			** So that it lines up with the honeycomb walls on the sides.

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank: /* Design */

2024-08-19T03:35:48Z

Design

← Older revision		Revision as of 03:35, 19 August 2024
Line 8:		Line 8:
	* Why not put the struts inside, as opposed to outside?		* Why not put the struts inside, as opposed to outside?
	** The honeycomb is oriented. Supporting internal struts would mean either restricting their placement to a few of the combs, or no longer supporting other arbitrary external hookups.		** The honeycomb is oriented. Supporting internal struts would mean either restricting their placement to a few of the combs, or no longer supporting other arbitrary external hookups.

			* Why no beveling on the top and bottom?
			** None on the top so you can sit something atop it.

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank at 03:01, 19 August 2024

2024-08-19T03:01:00Z

← Older revision		Revision as of 03:01, 19 August 2024
Line 4:		Line 4:

	OpenSCAD source is available on [https://github.com/dankamongmen/bowlsofwrath github].		OpenSCAD source is available on [https://github.com/dankamongmen/bowlsofwrath github].

			==Design==
			* Why not put the struts inside, as opposed to outside?
			** The honeycomb is oriented. Supporting internal struts would mean either restricting their placement to a few of the combs, or no longer supporting other arbitrary external hookups.

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank at 02:46, 19 August 2024

2024-08-19T02:46:01Z

← Older revision		Revision as of 02:46, 19 August 2024
Line 1:		Line 1:
	FDM material wants to be kept dry, and [https://www.thingiverse.com/thing:6254854 Modmike's Ultimate No Drill Dry Box System] is a fine way to do so using cheap cereal containers. This immediately leads to the question: how to store said containers? Most solutions are heavy on consumed area, and light on height. My condo has 10-foot ceilings, but only 1200 square feet. I needed a solution that made good use of height.		FDM material wants to be kept dry, and [https://www.thingiverse.com/thing:6254854 Modmike's Ultimate No Drill Dry Box System] is a fine way to do so using cheap cereal containers. This immediately leads to the question: how to store said containers? Most solutions are heavy on consumed area, and light on height. My condo has 10-foot ceilings, but only 1200 square feet. I needed a solution that made good use of height.

	My Magnificent Bowls can each snugly store 2x cereal containers. The sides expose 3x8 [https://www.printables.com/model/152592-honeycomb-storage-wall honeycomb walls], into which are inserted struts (and anything else you'd like). The struts allow for pretty much arbitrary stacking.		My Magnificent Bowls can each snugly store 2x cereal containers. The sides expose 3x8 [https://www.printables.com/model/152592-honeycomb-storage-wall honeycomb walls], into which are inserted struts (and anything else you'd like). The struts allow for pretty much arbitrary stacking. All faces meet in chamfers for additional strength. The front and back are cut away, but support insertion of panels indicating the Bowl's contents.

	OpenSCAD source is available on [https://github.com/dankamongmen/bowlsofwrath github].		OpenSCAD source is available on [https://github.com/dankamongmen/bowlsofwrath github].

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank at 02:43, 19 August 2024

2024-08-19T02:43:21Z

← Older revision		Revision as of 02:43, 19 August 2024
Line 1:		Line 1:
	FDM material wants to be kept dry, and [https://www.thingiverse.com/thing:6254854 Modmike's Ultimate No Drill Dry Box System] is a fine way to do so using cheap cereal containers. This immediately leads to the question: how to store said containers? Most solutions are heavy on consumed area, and light on height. My condo has 10-foot ceilings, but only 1200 square feet. I needed a solution that made good use of height.		FDM material wants to be kept dry, and [https://www.thingiverse.com/thing:6254854 Modmike's Ultimate No Drill Dry Box System] is a fine way to do so using cheap cereal containers. This immediately leads to the question: how to store said containers? Most solutions are heavy on consumed area, and light on height. My condo has 10-foot ceilings, but only 1200 square feet. I needed a solution that made good use of height.

	[[OpenSCAD]] source is available on [https://github.com/dankamongmen/bowlsofwrath github].		My Magnificent Bowls can each snugly store 2x cereal containers. The sides expose 3x8 [https://www.printables.com/model/152592-honeycomb-storage-wall honeycomb walls], into which are inserted struts (and anything else you'd like). The struts allow for pretty much arbitrary stacking.

			OpenSCAD source is available on [https://github.com/dankamongmen/bowlsofwrath github].

	[[CATEGORY: Projects]]		[[CATEGORY: Projects]]

Dank: Created page with "FDM material wants to be kept dry, and [https://www.thingiverse.com/thing:6254854 Modmike's Ultimate No Drill Dry Box System] is a fine way to do so using cheap cereal containers. This immediately leads to the question: how to store said containers? Most solutions are heavy on consumed area, and light on height. My condo has 10-foot ceilings, but only 1200 square feet. I needed a solution that made good use of height. OpenSCAD source is available on [https://github...."

2024-08-19T02:41:41Z

Created page with "FDM material wants to be kept dry, and [https://www.thingiverse.com/thing:6254854 Modmike's Ultimate No Drill Dry Box System] is a fine way to do so using cheap cereal containers. This immediately leads to the question: how to store said containers? Most solutions are heavy on consumed area, and light on height. My condo has 10-foot ceilings, but only 1200 square feet. I needed a solution that made good use of height. OpenSCAD source is available on [https://github...."

New page

FDM material wants to be kept dry, and [https://www.thingiverse.com/thing:6254854 Modmike's Ultimate No Drill Dry Box System] is a fine way to do so using cheap cereal containers. This immediately leads to the question: how to store said containers? Most solutions are heavy on consumed area, and light on height. My condo has 10-foot ceilings, but only 1200 square feet. I needed a solution that made good use of height.

[[OpenSCAD]] source is available on [https://github.com/dankamongmen/bowlsofwrath github].

[[CATEGORY: Projects]]