InaMORata 2.0: Difference between revisions
No edit summary |
|||
| (3 intermediate revisions by the same user not shown) | |||
| Line 23: | Line 23: | ||
** DS18B20 digital thermistor | ** DS18B20 digital thermistor | ||
* USB-C header with pigtails | * USB-C header with pigtails | ||
* G¼" flow sensor with visual display (optional) | |||
You'll need a hot air gun and a soldering iron (plus whatever you use to assemble the Mo-Ra, and attach things to it). | You'll need a hot air gun and a soldering iron (plus whatever you use to assemble the Mo-Ra, and attach things to it). | ||
The flow sensor is optional, but provides local visual display of coolant temperature and flow. It's about $50; I like the [https://www.amazon.com/DIYhz-displaydigital-Thermometer-Temperature-Indicator DIYhz]. If you get it, power it off one of the CODI6's fan headers. These don't tend to have any digital output, so don't bother trying to sample a tach from it (there's only two wires: 12V and ground). | |||
==Microelectronics== | ==Microelectronics== | ||
| Line 60: | Line 63: | ||
* SATA splitter takes 12V to 2x pumps | * SATA splitter takes 12V to 2x pumps | ||
* CODI6 takes 12V (via fan hookup) and 5V (via ARGB hookup) to 3x rightmost fans | * CODI6 takes 12V (via fan hookup) and 5V (via ARGB hookup) to 3x rightmost fans | ||
* CODI6 takes 12V (via fan hookup) to flow sensor | |||
* 3x rightmost fans take 12V+5V to corresponding 3x middle fans | * 3x rightmost fans take 12V+5V to corresponding 3x middle fans | ||
* 3x middle fans takes 12V+5V to corresponding 3x leftmost fans | * 3x middle fans takes 12V+5V to corresponding 3x leftmost fans | ||