Dankdryer improvements: Difference between revisions
| (One intermediate revision by the same user not shown) | |||
| Line 29: | Line 29: | ||
* I experimented with adding a kinda inverted eggholder (actually just a bunch of inverted frustra) to the underside of the bottom chamber, in the hope of eliminating warping. It didn't really pan out (a good number detached from the build plate), and you need defeat warping for the top chamber anyway, so I removed them. | * I experimented with adding a kinda inverted eggholder (actually just a bunch of inverted frustra) to the underside of the bottom chamber, in the hope of eliminating warping. It didn't really pan out (a good number detached from the build plate), and you need defeat warping for the top chamber anyway, so I removed them. | ||
* I'd love to get rid of the internal AC, but the heater maxes out at 4.5A of 120VAC. That's 45A of 12VDC, and now you're talking a (fairly large) power supply running close to $30. | * I'd love to get rid of the internal AC, but the heater maxes out at 4.5A of 120VAC. That's 45A of 12VDC, and now you're talking a (fairly large) power supply running close to $30. | ||
* Maybe we should replace the hot chamber thermometer with a K-type thermocouple and the necessary PCB electronics/connector? | * Maybe we should replace the hot chamber thermometer with a K-type thermocouple and the necessary PCB electronics/connector? This looks quite expensive; if we don't need it, let's not. | ||