Gigabyte Aorus Master TRX40: Difference between revisions
Created page with "The [https://www.gigabyte.com/us/Motherboard/TRX40-AORUS-MASTER-rev-10#kf Aorus Master TRX40] from Gigabyte is a TRX40 motherboard supporting third-generation Threadrippers from AMD. ==Sensors== The Aorus Master sports (supposedly) an IT8688E and an IT8792E [https://en.wikipedia.org/wiki/Super_I/OSuper I/O Super I/O chip]. The <tt>it87</tt> module shipped in the Linux kernel as of at least 5.17.13 will load, recognizing an IT8733E: <pre> [ 4321.190178] it87: Found..." |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 17: | Line 17: | ||
one can force recognition of an IT8688E by supplying the parameters <tt>force_id=0x8688 ignore_resource_conflict=1</tt>, but these don't seem to provide a different result vis-à-vis <tt>lm_sensors</tt>, while generating nastygrams in dmesg. | one can force recognition of an IT8688E by supplying the parameters <tt>force_id=0x8688 ignore_resource_conflict=1</tt>, but these don't seem to provide a different result vis-à-vis <tt>lm_sensors</tt>, while generating nastygrams in dmesg. | ||
Either way, I get six temperature reports and five fan reports, along with some electrical data: | |||
<pre> | |||
it8686-isa-0a40 | |||
Adapter: ISA adapter | |||
in0: 1.01 V (min = +0.00 V, max = +3.06 V) | |||
in1: 2.03 V (min = +0.00 V, max = +3.06 V) | |||
in2: 2.05 V (min = +0.00 V, max = +3.06 V) | |||
in3: 2.03 V (min = +0.00 V, max = +3.06 V) | |||
in4: 1.37 V (min = +0.00 V, max = +3.06 V) | |||
in5: 1.09 V (min = +0.00 V, max = +3.06 V) | |||
in6: 1.37 V (min = +0.00 V, max = +3.06 V) | |||
3VSB: 3.34 V (min = +0.00 V, max = +6.12 V) | |||
Vbat: 3.17 V | |||
fan1: 4720 RPM (min = 10 RPM) | |||
fan2: 1205 RPM (min = 0 RPM) | |||
fan3: 0 RPM (min = 0 RPM) | |||
fan4: 0 RPM (min = 0 RPM) | |||
fan5: 745 RPM (min = 0 RPM) | |||
temp1: +35.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor | |||
temp2: +48.0°C (low = +0.0°C, high = +90.0°C) sensor = thermistor | |||
temp3: +42.0°C (low = +0.0°C, high = +90.0°C) sensor = AMD AMDSI | |||
temp4: +42.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor | |||
temp5: +33.0°C (low = +0.0°C, high = -125.0°C) sensor = thermistor | |||
temp6: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor | |||
intrusion0: OK | |||
</pre> | |||
I'm pretty sure that <tt>temp6</tt> is external temp sensor 2 (<tt>EXTEMP2</tt>). External temp sensor 1 doesn't seem to be included. <tt>fan1</tt> definitely appears to be <tt>CPU0</tt>. | |||