Check out my first novel, midnight's simulacra!
Raspberry Pi: Difference between revisions
From dankwiki
No edit summary |
(add pi zero 2 w) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 10: | Line 10: | ||
!RAM | !RAM | ||
!Released | !Released | ||
|- | |||
|Pi 5 | |||
| | |||
|Standard | |||
|BCM2712 + RP1 | |||
|2.4GHz Cortex-A76 | |||
|4/8GB | |||
|2023-09-28 | |||
|- | |||
|Pi 400 | |||
| | |||
|Computer kit | |||
|BCM2711C0 | |||
|1.5GHz Cortex-A72 | |||
|4GB | |||
|2020 | |||
|- | |- | ||
|Pi 4 | |Pi 4 | ||
|B | |B | ||
|Standard | |Standard | ||
| | |BCM2711B0 | ||
|1.5GHz Cortex-A72 | |1.5GHz Cortex-A72 | ||
|1/2/4GB | |1/2/4GB | ||
Line 41: | Line 57: | ||
|2016 | |2016 | ||
|- | |- | ||
| rowspan=" | | rowspan="3" | Pi Zero | ||
|Zero | |Zero | ||
| rowspan=" | | rowspan="3" | Zero | ||
(65 × 30 mm) | (65 × 30 mm) | ||
| rowspan="2" | BCM2835 | | rowspan="2" | BCM2835 | ||
| rowspan="2" | 1GHz ARM11<br/>76JZF-S | | rowspan="2" | 1GHz ARM11<br/>76JZF-S | ||
| rowspan=" | | rowspan="3" | 512MB | ||
|2017 | |2017 | ||
|- | |- | ||
|W/WH | |W/WH | ||
|2015 | |2015 | ||
|- | |||
|W2/WH2 | |||
|BCM2710A1 | |||
|1GHz Cortex-A53 | |||
|2019 | |||
|- | |- | ||
| rowspan="2" | Pi 2 | | rowspan="2" | Pi 2 | ||
Line 86: | Line 107: | ||
|2012 | |2012 | ||
|} | |} | ||
==UART== | |||
Add "enable_uart=1" to <tt>/boot/config.txt</tt>. | |||
==External links== | |||
* SimplyEmbedded's [http://www.simplyembedded.org/tutorials/msp430-uart/ guide to UART] |
Latest revision as of 22:25, 26 March 2024
All models prior to the Raspberry Pi 4 use LPDDR2, as opposed to its LPDDR4.
Family | Model | Form Factor | SoC | Processor | RAM | Released |
---|---|---|---|---|---|---|
Pi 5 | Standard | BCM2712 + RP1 | 2.4GHz Cortex-A76 | 4/8GB | 2023-09-28 | |
Pi 400 | Computer kit | BCM2711C0 | 1.5GHz Cortex-A72 | 4GB | 2020 | |
Pi 4 | B | Standard | BCM2711B0 | 1.5GHz Cortex-A72 | 1/2/4GB | 2019 |
Pi 3 | A+ | Compact | BCM2837B0 | 1.4GHz Cortex-A53 | 256/512MB | 2018 |
B+ | Standard | BCM2837B0 | 1.4GHz Cortex-A53 | 1GB | 2018 | |
B | Standard | BCM2837 | 1.2GHz Cortex-A53 | 1GB | 2016 | |
Pi Zero | Zero | Zero
(65 × 30 mm) |
BCM2835 | 1GHz ARM11 76JZF-S |
512MB | 2017 |
W/WH | 2015 | |||||
W2/WH2 | BCM2710A1 | 1GHz Cortex-A53 | 2019 | |||
Pi 2 | B v1.1 | Standard | BCM2836 | 900MHz Cortex-A7 | 1GB | 2015 |
B v1.2 | BCM2837 | 1.2GHz Cortex-A53 (default 900MHz underclock) |
2015 | |||
Pi 1 | A+ | Compact
(65 × 56.5 mm) |
BCM2835 | 700MHz ARM11 76JZF-S |
512MB | 2014 |
B+ | Standard
(85.60 × 56.5 mm) |
2014 | ||||
A | 2013 | |||||
B | 2012 |
UART
Add "enable_uart=1" to /boot/config.txt.
External links
- SimplyEmbedded's guide to UART