Conbee II

[killermike](0) $ GCFFlasher_internal -l
GCFFlasher V3_17 (c) dresden elektronik ingenieurtechnik gmbh
Path             | Vendor | Product | Serial     | Type
-----------------+--------+---------+------------+-------
/dev/ttyACM0     | 0x1CF1 | 0x0030  | DE2468772  | ConBee II 
[killermike](0) $ 

[schwarzgerat](0) $ sudo GCFFlasher_internal -t 60 -d /dev/ttyACM0 -f ~/Downloads/deCONZ_ConBeeII_0x26720700.bin.GCF -x 3
GCFFlasher V3_17 (c) dresden elektronik ingenieurtechnik gmbh
13:21:22:809 using firmware file: /home/dank/Downloads/deCONZ_ConBeeII_0x26720700.bin.GCF 
13:21:22:825 ls dev: /dev/ttyACM0 (0x1CF1/0x0030) sn: DE2468772
13:21:22:825 pin serialno: DE2468772
13:21:22:825 search FTDI device: no.0
Reboot device /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2468772-if00 (ConBee II)
13:21:22:833 query bootloader v1 ID after 5 ms
13:21:23:334 close serial after 505
13:21:24:341 query bootloader v3 ID after 1513 ms
13:21:24:341 TX c081027dffc0
13:21:24:842 close serial after 2013
13:21:24:848 query deCONZ firmware version
13:21:24:849 SLIP RX frame length: 9
deCONZ firmware version 26580700    <------------------------------ current, pre-flash firmware
13:21:24:849 send watchdog reset 2 seconds
13:21:24:849 TX c00b02000c0005002602000000baffc0
13:21:24:850 set watchdog ttl status: 0x00
13:21:24:855 wait reboot: 2100 ms
13:21:28:957 query bootloader v1 ID after 2001 ms
13:21:28:968 RX 60 bytes ASCII 
R21B18 Bootloader
Vers: 2.07
build: Jun 17 2019
, 08:48:53
 after 2012 ms
13:21:28:968 bootloader start after 2012 ms
R21B18 Bootloader
Vers: 2.07
build: Jun 17 2019
13:21:28:969 GCF_ResetDeviceDone
13:21:28:970 bootloader v1 update firmware
flashing 164227 bytes: |==============================|
verify: .
SUCCESS
Wait 10 seconds until application starts
[schwarzgerat](0) $