Check out my first novel, midnight's simulacra!

100GbE: Difference between revisions

From dankwiki
No edit summary
 
(One intermediate revision by the same user not shown)
Line 12: Line 12:
* [https://www.broadcom.com/products/ethernet-connectivity/network-adapters/p2200g Broadcom P2200G] (dual port, pcie 4.0x16, 200Gbps)
* [https://www.broadcom.com/products/ethernet-connectivity/network-adapters/p2200g Broadcom P2200G] (dual port, pcie 4.0x16, 200Gbps)
* [https://www.xilinx.com/products/boards-and-kits/x2-series/x2541.html Solarflare X2541] (pcie 3.1x16)
* [https://www.xilinx.com/products/boards-and-kits/x2-series/x2541.html Solarflare X2541] (pcie 3.1x16)
* [https://www.netronome.com/media/documents/PB_NFP-6000-7-20.pdf Netronome NFP-6000] (dual port, pcie 3.0x8)
* [https://www.netronome.com/media/documents/PB_NFP-6000-7-20.pdf Netronome NFP-6000] (pcie 3.0x8)
 
==See also==
* [[10GbE]]

Latest revision as of 08:49, 7 April 2024

100 Gigabit Ethernet achieves 100Gbs data rates using the Ethernet Layer 2 protocol over a variety of media, usually using QSFP28 transceivers. There are four generations, depending on whether it's 10x10Gb, 4x25Gb, 2x50Gb, or pure 100Gb per direction. It is defined on CAT-7A and CAT-8 copper, twinaxial, and fibre.

100GbE NICs

PCIe 3.0 at 8 lanes doesn't have sufficient throughput to carry a full 100Gbps; its theoretical max is 7.877GB/s or 63.016Gb/s. PCIe 4.0 at 8 lanes or PCIe 3.0 at 16 lanes are necessary. A full 200Gbps signal (or two 100Gbps ports) requires 16 lanes of PCIe 4.0 or 8 lanes of PCIe 5.0. A full 400Gbps signal (or two 200Gbps ports) requires 16 lanes of PCIe 5.0, 8 lanes of PCIe 6.0, or 4 lanes of PCIe 7.0.

See also