InaMORata 2.0: Difference between revisions
No edit summary |
|||
| Line 33: | Line 33: | ||
* SATA splitter takes 12V+5V to CODI6 + SATA splitter | * SATA splitter takes 12V+5V to CODI6 + SATA splitter | ||
* SATA splitter takes 12V to 2x pumps | * SATA splitter takes 12V to 2x pumps | ||
* CODI6 takes 12V (via fan hookup) and 5V (via ARGB hookup) to 3x rightmost fans. | |||
* 3x rightmost fans take 12V+5V to corresponding 3x middle fans. | |||
* 3x middle fans takes 12V+5V to corresponding 3x leftmost fans. | |||
We don't need to expose the 5V to the pumps, but it doesn't hurt anything. | We don't need to expose the 5V to the pumps, but it doesn't hurt anything. The CODI6 has a 5-pin wire, where three pins (12V, 5V, ground) go to a SATA connector, and two pins (tach, pwm) go to a 4-hole Molex fan connector. This connector doesn't carry 12V or ground like a 4-wire Molex would. | ||
At this point, we have three hookups unconnected: the three Molex 4-hole connectors coming off the pumps and CODI6. Each has a tach and PWM signal, and none are drawing power. Hook them up to the perfboard's Molex 4-pin headers. | |||