Three recent physical projects: Difference between revisions
No edit summary |
|||
| Line 37: | Line 37: | ||
==Case faceplate with OLED display== | ==Case faceplate with OLED display== | ||
I'd already [[Waveshare_AMOLED|designed this faceplate]] and the AMOLED+[[Raspberry_Pi|Raspberry Pi]] that sits inside. I added a strip of high-intensity CoB LEDs, as long intended. I reprinted it using black ABS. To power the 12V LEDs, I took a SATA power cable and cut off the female end. I then separated the five cables. Bifurcate the ground wire, and solder a ground + 12V to the LED strip. SATA provides 5V and 12V (and sometimes 3.3V, unnecessary here), so we'll use the 5V to power the Pi+AMOLED (this will provide more amperage than a USB hookup). Bifurcate the 5V and second ground line, and solder one pair to each of two USB-µA plugs. Thread the LED strip through the faceplate in front of the OLED. | |||
[[File:Frontplate-leds.jpg|frame]] | |||
Beautiful! Tremendous! | |||
==Filter tower== | ==Filter tower== | ||