Check out my first novel, midnight's simulacra!
Filaments: Difference between revisions
From dankwiki
| Line 25: | Line 25: | ||
===Polyethylene terephthalate glycol (PETG)=== | ===Polyethylene terephthalate glycol (PETG)=== | ||
* Atomic Filaments black Carbon Fiber: result is very tough | * Atomic Filaments black Carbon Fiber: result is very tough | ||
* Bambu Support-W (breakaway PLA support) $35: works well enough | * Bambu Support-W (breakaway PLA support) $70 ($35/.5kg): works well enough, expensive | ||
Revision as of 22:34, 22 July 2024
Keeping notes on various FDM printing filaments here. Prices are per kilogram spool unless stated otherwise. Printing was done on a Bambu Carbon X1C unless stated otherwise.
Polylactic acid (PLA)
- Bambu silky green 2024-06 $25: beautiful results
Thermoplastic polyurethane (TPU)
- Overture 95A green 2024-06 $30: stringy as hell
Acrylonitrile butadiene styrene (ABS)
- Bambu black/green 2024-06 $14 (4kg @ $56): solid workhorse
High impact polystyrene (HIPS)
Support material for ABS/PET, dissolvable
- Bambu green Support-G $80 ($40/.5kg): expensive!
Acrylic styrene acrylonitrile (ASA)
- Atomic Filaments black 2024-06 $19 (7kg @ $130): lay the first layer at 105, and remaining layers at 115.
Polycarbonate (PC)
- Bambu clear black 2024-06 $40: befouled my .4mm hotend. Very lovely when it prints.
Polyamide Nylon (PA)
- Atomic Filaments black
Polyethylene terephthalate (PET)
Polyethylene terephthalate glycol (PETG)
- Atomic Filaments black Carbon Fiber: result is very tough
- Bambu Support-W (breakaway PLA support) $70 ($35/.5kg): works well enough, expensive
