Winbond: Difference between revisions
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
==[https://www.winbond.com/resource-files/w25n01gv%20revg%20032116.pdf W25N01GV]== | ==[https://www.winbond.com/resource-files/w25n01gv%20revg%20032116.pdf W25N01GV]== | ||
A 1Gb (128MB) Quad-SPI SLC NAND chip of | A 1Gb (128MB) Quad-SPI SLC NAND chip of 1K 128KB blocks (each made up of 64 2KB pages), capable of up to 104MHz Quad-SPI. | ||
Packagings include: | Packagings include: | ||
* 8-pad WSON 8x6mm (package code ZE) | * 8-pad WSON 8x6mm (package code ZE) | ||
| Line 11: | Line 11: | ||
* CLK serial clock input | * CLK serial clock input | ||
* /CS chip select input | * /CS chip select input | ||
** High deselects the device, putting it into standby mode (reduced power consumption) | |||
** Transition to low places device into active mode | |||
** /CS must track VCC during initialization and shutdown | |||
* DI (IO0) data input / data io0 | * DI (IO0) data input / data io0 | ||
* DO (IO1) data output / data io1 | * DO (IO1) data output / data io1 | ||
| Line 17: | Line 21: | ||
* VCC power (2.7V--3.6V) | * VCC power (2.7V--3.6V) | ||
* GND | * GND | ||
/WP and /HOLD are only for SPI/Dual-SPI (Quad-SPI uses data io 0--3). Data is always written on the rising edge of CLK, and read on the falling edge. SPI must write through DO and read through DI. Dual- and Quad-SPI treat data io pins as bidirectional. | |||