InaMORAta: Difference between revisions

m Dank moved page Fan Dank to InaMORAta: better name
No edit summary
Line 1: Line 1:
[[File:PXL 20220916 080028177.jpg|right|thumb|the completed apparatus]]
[[File:PXL 20220916 080028177.jpg|right|thumb|the completed apparatus]]
Let's fuck hard with some fans using an [[Arduino|Arduino MEGA]] and a [https://heltec.org/project/wifi-lora-32/ Heltec LoRa ESP32 v2]. These will be used with my [[MO-RA3]] to collect realtime data (fan RPMs, temperatures, etc.) and provide realtime control (fan PWM/RPM, RGB signals). We will also need an LM2596 buck converter and six IRLB8721 logic level MOSFETs (a previous version used a TXB0108 level shifter, but it has been replaced with a 2-resistor voltage divider), and various resistors.
Let's fuck hard with some fans using an [[Arduino|Arduino MEGA]] and a [https://heltec.org/project/wifi-lora-32/ Heltec LoRa ESP32 v2]. These will be used with my [[MO-RA3]] to collect realtime data (fan RPMs, temperatures, etc.) and provide realtime control (fan PWM/RPM, RGB signals). We will also need an LM2596 buck converter and six IRLB8721 logic level MOSFETs, a TXB0108 level shifter, and various resistors.


We use a 12V PWM+DRGB hub for the many fans of the MO-RA3. Only one fan's RPM will be reported (whichever one is plugged into the red fan hookup), so it's important that we use the same model throughout. The hub has a two-wire hookup for tach and PWM (12V and ground are provided through the SATA power hookup). Looking at the hub with the clear side oriented up, the left wire is the PWM input, and the right wire is the tach output.
We use a 12V PWM+DRGB hub for the many fans of the MO-RA3. Only one fan's RPM will be reported (whichever one is plugged into the red fan hookup), so it's important that we use the same model throughout. The hub has a two-wire hookup for tach and PWM (12V and ground are provided through the SATA power hookup). Looking at the hub with the clear side oriented up, the left wire is the PWM input, and the right wire is the tach output.