Check out my first novel, midnight's simulacra!
Filaments: Difference between revisions
From dankwiki
(→ABS) |
No edit summary |
||
| Line 1: | Line 1: | ||
Keeping notes on various [[3D_printers|FDM printing]] filaments here. Prices are per kilogram spool unless stated otherwise. Printing was done on a [[Bambu Carbon X1C]] unless stated otherwise. | Keeping notes on various [[3D_printers|FDM printing]] filaments here. Prices are per kilogram spool unless stated otherwise. Printing was done on a [[Bambu Carbon X1C]] unless stated otherwise. | ||
==PLA== | ==Polylactic acid (PLA)== | ||
* Bambu silky green 2024-06 $25: beautiful results | * Bambu silky green 2024-06 $25: beautiful results | ||
== | ==Thermoplastic polyurethane (TPU)== | ||
* Overture 95A green 2024-06 $30: stringy as hell | * Overture 95A green 2024-06 $30: stringy as hell | ||
==ABS== | ==Acrylonitrile butadiene styrene (ABS)== | ||
* Bambu black/green 2024-06 $14 (4kg @ $56): solid workhorse | * Bambu black/green 2024-06 $14 (4kg @ $56): solid workhorse | ||
===HIPS=== | ===High Impact Polystyrene (HIPS)=== | ||
Support material for ABS/PET | Support material for ABS/PET, dissolvable | ||
* Bambu green Support-G $40 | * Bambu green Support-G $40 | ||
==ASA== | ==Acrylic styrene acrylonitrile (ASA)== | ||
* Atomic Filaments black 2024-06 $19 (7kg @ $130): lay the first layer at 105, and remaining layers at 115. | * Atomic Filaments black 2024-06 $19 (7kg @ $130): lay the first layer at 105, and remaining layers at 115. | ||
==Polycarbonate== | ==Polycarbonate (PC)== | ||
* Bambu clear black 2024-06 $40: befouled my .4mm hotend. Very lovely when it prints. | * Bambu clear black 2024-06 $40: befouled my .4mm hotend. Very lovely when it prints. | ||
==Nylon== | ==Polyamide Nylon (PA)== | ||
* Atomic Filaments black | * Atomic Filaments black | ||
==Polyethylene terephthalate (PET)== | |||
===Polyethylene terephthalate glycol (PETG)=== | |||
* Atomic Filaments black Carbon Fiber: result is very tough | |||
Revision as of 07:54, 22 July 2024
Keeping notes on various FDM printing filaments here. Prices are per kilogram spool unless stated otherwise. Printing was done on a Bambu Carbon X1C unless stated otherwise.
Polylactic acid (PLA)
- Bambu silky green 2024-06 $25: beautiful results
Thermoplastic polyurethane (TPU)
- Overture 95A green 2024-06 $30: stringy as hell
Acrylonitrile butadiene styrene (ABS)
- Bambu black/green 2024-06 $14 (4kg @ $56): solid workhorse
High Impact Polystyrene (HIPS)
Support material for ABS/PET, dissolvable
- Bambu green Support-G $40
Acrylic styrene acrylonitrile (ASA)
- Atomic Filaments black 2024-06 $19 (7kg @ $130): lay the first layer at 105, and remaining layers at 115.
Polycarbonate (PC)
- Bambu clear black 2024-06 $40: befouled my .4mm hotend. Very lovely when it prints.
Polyamide Nylon (PA)
- Atomic Filaments black
Polyethylene terephthalate (PET)
Polyethylene terephthalate glycol (PETG)
- Atomic Filaments black Carbon Fiber: result is very tough
