Check out my first novel, midnight's simulacra!
Load cells: Difference between revisions
From dankwiki
(Created page with "Electric load cells are transducers converting tension/compression/torque into an electrical signal (usually a voltage level). Combined with a suitable ADC, they're the usual way to get deformation (e.g. weight) measurements into MCUs like Arduino or ESP32. ==Suitable ICs== * Infineon HX711: two-wire communication. Difficult to find as a discrete component; more frequently available on breakout boards, including from Adafruit and SparkFun (SEN-13230, SEN-13879)....") |
|||
| Line 2: | Line 2: | ||
==Suitable ICs== | ==Suitable ICs== | ||
These are all 24-bit sigma-delta ADCs. | |||
* Infineon HX711: two-wire communication. Difficult to find as a discrete component; more frequently available on breakout boards, including from Adafruit and SparkFun (SEN-13230, SEN-13879). | * Infineon HX711: two-wire communication. Difficult to find as a discrete component; more frequently available on breakout boards, including from Adafruit and SparkFun (SEN-13230, SEN-13879). | ||
* Nuvatron NAU7802: Communication via I<sup>2</sup>C. Available in throughhole (KGI) and SMD (SGI) form factors. | * Nuvatron NAU7802: Communication via I<sup>2</sup>C. Available in throughhole (KGI) and SMD (SGI) form factors. | ||
* TI ADS1231/ADS1232: two-wire communication. SMD only. | * TI ADS1231/ADS1232: two-wire communication. SMD only. | ||
* Analog Devices AD7780: two-wire communication. Available in throughhole (BRUZ, 16 pin) and SMD (BRZ, 14 pin) form factors. | |||
[[CATEGORY: Hardware]] | [[CATEGORY: Hardware]] | ||
Revision as of 17:43, 14 January 2025
Electric load cells are transducers converting tension/compression/torque into an electrical signal (usually a voltage level). Combined with a suitable ADC, they're the usual way to get deformation (e.g. weight) measurements into MCUs like Arduino or ESP32.
Suitable ICs
These are all 24-bit sigma-delta ADCs.
- Infineon HX711: two-wire communication. Difficult to find as a discrete component; more frequently available on breakout boards, including from Adafruit and SparkFun (SEN-13230, SEN-13879).
- Nuvatron NAU7802: Communication via I2C. Available in throughhole (KGI) and SMD (SGI) form factors.
- TI ADS1231/ADS1232: two-wire communication. SMD only.
- Analog Devices AD7780: two-wire communication. Available in throughhole (BRUZ, 16 pin) and SMD (BRZ, 14 pin) form factors.
