Schwarzgerät III

Line 36:

===Cooling===

An entirely custom water loop with redundant D5 pumps (either can drive the entire loop, though of course with less flow). I can partially drain and fill the loop without touching anything through the externally-mounted Kinetic FLT. Full draining and optimal filling proceed via the 5.25"-mounted Monsoon, sitting at the bottom of the case; this requires removing the USB bay installed above it.

There are 15 120mm fans, 4 140mm fans, 1 80mm fan (in the 4x3.5 bay), and 1 40mm fan (in the 4x2.5 bay). There's also a 55mm chipset fan in the lower-right corner of the motherboard, and a 30mm fan under the IO shield (now uselessly) attempting to cool the VRMs.

* [https://www.ekwb.com/shop/ek-quantum-kinetic-flt-240-d5-pwm-d-rgb-plexi EKWB Quantum Kinetic FLT 240] D5 pump + reservoir with mounting brackets. Installed halfway up the case's back, outside. Pump is an EK Laing PWM D5.

* [http://monsooncooling.com/reservoir.php Monsoon MMRS Series II] D5 pump housing + reservoir with 2x Silver Bullet biocide G1/4 plugs. Installed at the front bottom of the case, in the lowest two 5.25" bays.

Schwarzgerät III: Difference between revisions

Dank (talk | contribs)

@@ Line 36: / Line 36: @@
 ===Cooling===
 An entirely custom water loop with redundant D5 pumps (either can drive the entire loop, though of course with less flow). I can partially drain and fill the loop without touching anything through the externally-mounted Kinetic FLT. Full draining and optimal filling proceed via the 5.25"-mounted Monsoon, sitting at the bottom of the case; this requires removing the USB bay installed above it.
+There are 15 120mm fans, 4 140mm fans, 1 80mm fan (in the 4x3.5 bay), and 1 40mm fan (in the 4x2.5 bay). There's also a 55mm chipset fan in the lower-right corner of the motherboard, and a 30mm fan under the IO shield (now uselessly) attempting to cool the VRMs.
 * [https://www.ekwb.com/shop/ek-quantum-kinetic-flt-240-d5-pwm-d-rgb-plexi EKWB Quantum Kinetic FLT 240] D5 pump + reservoir with mounting brackets. Installed halfway up the case's back, outside. Pump is an EK Laing PWM D5.
 * [http://monsooncooling.com/reservoir.php Monsoon MMRS Series II] D5 pump housing + reservoir with 2x Silver Bullet biocide G1/4 plugs. Installed at the front bottom of the case, in the lowest two 5.25" bays.