Schwarzgerät III upgrade: Difference between revisions
| Line 11: | Line 11: | ||
** Added PCIe 1x card exposing an internal 19-pin USB3 header and 2 external USB3 Type-A ports. | ** Added PCIe 1x card exposing an internal 19-pin USB3 header and 2 external USB3 Type-A ports. | ||
** Added Gelid Codi6 PWM+ARGB hub. | ** Added Gelid Codi6 PWM+ARGB hub. | ||
* '''Cooling''': Added six Phanteks T30 fans and moved some others around. Flipped bottom cooling complexes to blow inside the case (up) rather than outside (down), as there otherwise wasn't enough air flowing into the machine. Inverted PSU-side XFLOW, and shortened associated coolant tubes. Added | * '''Cooling''': Added six Phanteks T30 fans and moved some others around. Flipped bottom cooling complexes to blow inside the case (up) rather than outside (down), as there otherwise wasn't enough air flowing into the machine. Inverted PSU-side XFLOW, and shortened associated coolant tubes. Added drain port to bottom of PSU side, at the loop's true lowest point. Moved DiyHZ sensor above the video card. Inserted NEXT where DiyHZ had been. Added some EKWB Quantum Torque Rotary 90° adapters to simplify tubing. Added XTOP Dual D5 pumps behind where Monsoon had been. | ||
* '''Structure''': | * '''Structure''': | ||
** Designed and printed [[:File:Cablebracket.jpg|pci bracket with cable guide]]. | ** Designed and printed [[:File:Cablebracket.jpg|pci bracket with cable guide]]. | ||
** Designed and printed cable | ** Designed and printed [[:File:3dprinted-cablefront.jpg|cable shroud]] for mobo side. | ||
** Designed and printed [[:File:Xtopbrace.jpg|sliding brace]] for XTOP. | ** Designed and printed [[:File:Xtopbrace.jpg|sliding brace]] for XTOP. | ||
* '''Power''': Upgraded to a 1000W supply, eliminating the need for my jury-rigged 12V+5V Molexen. | * '''Power''': Upgraded to a 1000W supply, eliminating the need for my jury-rigged 12V+5V Molexen. | ||