Check out my first novel, midnight's simulacra!

Growlight

From dankwiki
File:Growlight.jpg

Growlight is Sprezzatech's open source installer project, designed for use with SprezzOS.

Resources

The Growlight component of the SprezzOS project can be found on Sprezzabugs. Source is available from GitHub.

8 SATAII devices on 8xPCIe 2.0: 3GB/s on 4GB/s ✔
LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
 [0:0:0:0]    disk    ATA      ST2000DL003-9VT1 CC3C 
 [0:0:1:0]    disk    ATA      ST2000DL003-9VT1 CC3C
 [0:0:2:0]    disk    ATA      ST2000DL003-9VT1 CC32
 [0:0:3:0]    disk    ATA      ST2000DL003-9VT1 CC3C
 [0:0:4:0]    disk    ATA      INTEL SSDSA2M080 02HD
 [0:0:5:0]    disk    ATA      WDC WD20EARS-00M 51.0
 [0:0:6:0]    disk    ATA      WDC WD20EARS-00M 51.0
 [0:0:7:0]    disk    ATA      ST2000DL003-9VT1 CC32

2 SATAIII devices on 1xPCIe 2.0: 1.5GB/s on 500MB/s ✘
Marvell Technology Group Ltd. 88SE9120 SATA 6Gb/s Controller (rev 12)
[10:0:0:0]    disk    ATA      ST2000DL003-9VT1 CC32
[11:0:0:0]    disk    ATA      ST3000DM001-9YN1 CC9C

1 SATAII device on USB 2.0: 375MB/s on 480MB/s ✔−
Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
[19:0:0:0]    disk    HTC      Android Phone    0100

1 SATAIII device +
1 SATAII device on 1xPCIe 2.0: 1.5GB/s on 500MB/s ✘
Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 11)
 [2:0:0:0]    disk    ATA      INTEL SSDSA2CW12 0302
 [3:0:0:0]    disk    ATA      ST2000DL003-9VT1 CC32

4 SATAII devices +
1 SATAIII-on-SATAII device (✘) on PCI 2.0 PCH (?)
Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)
 [4:0:0:0]    disk    ATA      ST9320423AS      SDM1
 [5:0:0:0]    disk    ATA      ST9320423AS      SDM1
 [6:0:0:0]    cd/dvd  ATAPI    iHBS112   2      CL0F
 [7:0:0:0]    disk    ATA      WDC WD20EARX-00P 51.0
 [9:0:0:0]    disk    ATA      ST3000DM001-9YN1 CC9C


1 MDRAID6
1 MDRAID1
1 ZFS ZRAID2

Definite Goals

Disks

  • Fully support ZFS during install, include RAIDZ setup
  • Use GPT (correctly) by default.
  • Extract true parameters from SSDs and 4k sector (especially WD-EARS) drives
  • Properly align everything

Possible Goals

  • Install either Linux or FreeBSD