Android

Samsung Galaxy 4

Keys

• Home: The large black button on the bottom front
• Volume Down: The leftside switch, depressed towards the bottom
• Volume Up: The leftside switch, depressed towards the top

Recovery Mode

• Booting into recovery mode:
  • Power down the device
  • Power on the device while holding down Volume Down and Home

CyanogenMod

• http://wiki.cyanogenmod.org/w/Install_CM_for_jfltetmo

MTP

• Build from source after cloning https://github.com/hanwen/go-mtpfs

[skynet](1) $ sudo  Downloads/go-mtpfs.6b55d1.x86_64 ~/skynetmobile/ &
2013/07/05 23:47:56 starting FUSE d7ac6b9 (2013-06-28 09:55:43 +0200)

Heimdall

• Build from source after cloning https://github.com/Benjamin-Dobell/Heimdall.git

[skynet](1) $ sudo heimdall flash --verbose --recovery recovery-clockwork-6.0.3.2-jfltetmo.img  --no-reboot
Heimdall v1.4.0

Copyright (c) 2010-2013, Benjamin Dobell, Glass Echidna
http://www.glassechidna.com.au/

This software is provided free of charge. Copying and redistribution is
encouraged.

If you appreciate this software and you would like to support future
development please consider donating:
http://www.glassechidna.com.au/donate/

Initialising connection...
Detecting device...
      Manufacturer: "Sasmsung"
           Product: "MSM8960"

            length: 18
      device class: 2
               S/N: 0
           VID:PID: 04E8:685D
         bcdDevice: 0100
   iMan:iProd:iSer: 1:2:0
          nb confs: 1

interface[0].altsetting[0]: num endpoints = 1
   Class.SubClass.Protocol: 02.02.01
       endpoint[0].address: 82
           max packet size: 0010
          polling interval: 09

interface[1].altsetting[0]: num endpoints = 2
   Class.SubClass.Protocol: 0A.00.00
       endpoint[0].address: 81
           max packet size: 0200
          polling interval: 00
       endpoint[1].address: 01
           max packet size: 0200
          polling interval: 00
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...

Initialising protocol...
WARNING: Control transfer #1 failed. Result: -9
WARNING: Control transfer #2 failed. Result: -9
WARNING: Control transfer #3 failed. Result: -9
WARNING: Control transfer #4 failed. Result: -9
WARNING: Control transfer #5 failed. Result: -9
WARNING: Control transfer #6 failed. Result: -9
Protocol initialisation successful.

Beginning session...

Some devices may take up to 2 minutes to respond.
Please be patient!

Session begun.

Downloading device's PIT file...
PIT file download successful.

ERROR: Partition "recovery" does not exist in the specified PIT.
Ending session...
Releasing device interface...
Re-attaching kernel driver...

[skynet](1) $