Check out my first novel, midnight's simulacra!
LED counts
From dankwiki
LED counts, power draw, etc. for certain devices i own. It's useful to have this information for e.g. OpenRGB, especially for advanced effects. Wattage is for LEDs only, not the entire unit.
A SATA power connector supports 3 pins of each of three voltages, with every pin rated for at least 1.5A. Such a connector can thus provide 4.5A of 3.3V, 5V, and 12V (14.85W, 22.5W, and 54W for a total of 91.35W).
| Device | 12V LEDs | 5V LEDs | Watts |
|---|---|---|---|
| Arctic P12 ARGB 120mm fan | 0 | 12 | 2 |
| Arctic P14 ARGB 140mm fan | 0 | 12 | 2 |
| Arctic P14 RGB 140mm fan | 12 | 0 | 2.4 |
| Lian Li LAN2-2X | 0 | 37 | ? |
| Airgoo NEON 15.7in | 0 | 21 | 10 |
| EZDIY-FAB 400mm | 0 | 30 | ? |
| EKWB Quantum Kinetic FLT 240 reservoir | 0 | 15 | 3.9 |
| Lian Li SL-Infinity 120mm fan | 0 | 40 | 3 |
| Corsair Pro strips | 0 | 10 | 1.835 |
| Corsair LL 120 RGB | 0 | 16 | 3.195 |
| Corsair HD 120 RGB | 0 | 12 | 2.18 |
| Corsair ML 120 RGB | 0 | 4 | 0.675 |
| Corsair QL 120 RGB | 0 | 34 | 2.655 |
| Gelid Lyra 140mm fan | 0 | 24 | 5 |
| Phanteks NEON 550mm strip | 0 | 38 | 7 |
| Alphacool Eisblock XPX Pro waterblock | 0 | 14 |
Corsair data are largely due DevBiker at the Corsair forums.
