Check out my first novel, midnight's simulacra!

Monoprice Voxel 3D Printer

From dankwiki

Revision as of 21:42, 26 October 2019 by Dank (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

The Monoprice Voxel is an affordable 3D printer using 1.75mm filament.

It claims to support 3MF, STL, OBJ, FPP, BMP, PNG, and JPG via its slicing software; GX and G are directly supported.

Calibration

Enter calibration mode using the on-screen display.
The nozzle will be lowered by the device.
Fine-tune the nozzle until a piece of paper can just slide underneath it.
- Use the up and down buttons on the touchscreen

Retrieved from "https://nick-black.com/dankwiki/index.php?title=Monoprice_Voxel_3D_Printer&oldid=6470"