Check out my first novel, midnight's simulacra!

ESP8266

From dankwiki
Revision as of 05:39, 26 November 2022 by Dank (talk | contribs) (→‎External links)
Pinout for the NodeMCU v1

A series of 32-bit microcontroller units from Espressif, followed by the ESP32. The first generation of the NodeMCU SoC was based around ESP8266.

Notes

  • There is only one (10-bit) ADC, and it reports values between [0, 1], not [0, 3.3]. This is not a scaling--the input voltage should not exceed 1V.
    • This is not true for e.g. the NodeMCU, which applies a divider network to scale the 3.3V down to 1V. This allows supplying 3.3V to the external device.
    • On the NodeMCU, this ADC can read the battery voltage instead of a connected external device. This is set in firmware.

External links