Debian Unstable

Installing Sid

• Acquire the daily businesscard ISO.
  • These won't work from time to time, especially when base packages are being upgraded (the installer will expect a version which is no longer available)
• Prepare external firmware, if necessary
• Boot the ISO, selecting an Expert install

Post-install

sudo

• Install sudo. Edit /etc/sudoers (using visudo) to allow the sudo group to run all commands without a password:

%sudo ALL=(ALL:ALL) NOPASSWD:ALL

• Add user account to sudo group

debconf

• dpkg-reconfigure debconf, set minimum priority to Low
• dpkg-reconfigure -a, reconfiguring all debconf questions

boot process

• Edit /etc/default/rcS, enabling FSCKFIX, VERBOSE, RAMRUN, RAMLOCK
• Edit /etc/default/grub, removing "quiet" from GRUB_CMDLINE_LINUX_DEFAULT
  • Rerun update-grub
• Ensure LABEL or UUID directives are being used in /etc/fstab
  • If not, retrieve them using blkid, and replace the /dev references
• Install mcelog. Edit /etc/default/mcelog, adding "--syslog_error" to DAEMON_OPTS.
• Install ntpd. Edit /etc/default/ntp, changing NTPD_OPTS to '-g -x'.
  • This allows the clock to be arbitrarily set once (presumably on startup), without slew delay
• Unless the machine is intended as a mail server, set up a smarthost with ssmtp, purging Postfix/Exim
• Install mingetty. Open /etc/inittab and convert 'getty 38400' to 'mingetty'.
• Install openssh-server. Disable password-based authentication (use only keys).
  • Debian already ships OpenSSH configured to use Protocol 2 only.
  • Optionally disable reverse DNS lookups: UseDNS no
  • Optionally disable password-based auth: PasswordAuthentication no

Multiuser

• Clone my home directory from https://github.com/dankamongmen/dankhome.git
• Set a color for the local machine in .pcolor
  • This is based on the binary bin/color, and hooks to PS1 in .bashrc
• Install compiz and gdm3.
• If SSH keys will be homed on this (hopefully local) machine...
  • Install libpam-ssh, and configure it
  • Recently, this can be done entirely inside of debconf -- no editing of PAM configs by hand
• Remove info and install pinfo
• FIXME plenty more..

External Applications

Perforce

• Grab the amd64 Perforce binaries
• Unpack the P4V tarball to local/
• Update the local/ symlink: ln -sf abspath local/p4
• Set up the p4 command line utility: chmod 775 p4 and mv p4 local/p4/bin

Flash

• So long as there's no native 64-bit Linux client, you can either...
  • Use the GNU Gnash plugin, which works kinda
  • Use the 32-bit player with nspluginwrapper, from Debian Multimedia

Debian Multimedia

• See the page at http://debian-multimedia.org/
• Add deb http://www.debian-multimedia.org sid main non-free to /etc/apt/sources.list, and install debian-multimedia-keyring