X10QBi

A SuperMicro motherboard supporting four LGA2011 CPUs and eight SuperMicro memory boards. The physical board comes in at least versions 1.01 and 1.21. It requires a SuperMicro AOM-X10QBi-A/L I/O board to boot (the card uses a proprietary slot). This card implements BNC/IPMI, offers two 10GigE ports via an Intel controller, and supports VGA.

Contrary to some information online, it boots just fine off a single CPU in Socket 1. It requires about five minutes to reach UEFI handoff, and goes through several dozen boot codes (some of them repeated) before doing so.

Boot codes

If the machine immediately goes to state FF and doesn't leave, the CPU output ports are not being written to. You have either a bad motherboard, at least one bad processor, and/or at least one badly-seated processor.

Updating BIOS via BMC

The most recent BIOS is 3.2 from 2019-08-08, X10QBi9.808.

[schwarzgerat](0) $ ./SMCIPMITool BMCADDRESS USERNAME PASSWORD bios update BIOSFILE --reboot
Option: SMBIOS preserve
===============
BIOS Image info
===============
Date     = 08/08/2019
MB Type  = X10QBi
Size     = 16 MB

=============
BIOS ROM info
=============
0726  BIOS Date: 6/12/2018                                      

====================
Uploading BIOS image
====================
Progress:|>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>| 100%
Upload Time: 0 min 48 sec(s)

=============
Updating BIOS
=============
Progress:|>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>| 100%
Update Time: 5 min 33 sec(s)
Total Elapse Time: 6 min 38 sec(s)
Done
[schwarzgerat](0) $ 

See Also

• My machine strangelet is based on the X10QBi platform