Check out my first novel, midnight's simulacra!

InaMORAta: Difference between revisions

From dankwiki
Line 92: Line 92:
* Not yet properly driving the LEDs =\
* Not yet properly driving the LEDs =\
* This needs to get cleaned up, obviously. at a bare minimum, wires need be soldered into the Heltec.
* This needs to get cleaned up, obviously. at a bare minimum, wires need be soldered into the Heltec.
* I think I can remove the 12V hub and just drive things off the 12V/ground lines on the breadboard. This would also remove the barreljack-to-SATA adapter (I'd just take the barreljack to a 2-way screwpost, and from there to the breadboard).
* I think I can remove the 12V hub and just drive things off the 12V/ground lines on the breadboard. This would also remove the barreljack-to-SATA adapter (I'd just take the barreljack to a 2-way screwpost, and from there to the breadboard). That would probably let me move everything to the side of the MO-RA3, which would be great.


[[CATEGORY:Projects]]
[[CATEGORY:Projects]]
[[CATEGORY:Hardware]]
[[CATEGORY:Hardware]]