Check out my first novel, midnight's simulacra!
Monoprice Voxel 3D Printer: Difference between revisions
From dankwiki
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
* Fine-tune the nozzle until a piece of paper can just slide underneath it. | * Fine-tune the nozzle until a piece of paper can just slide underneath it. | ||
** Use the up and down buttons on the touchscreen | ** Use the up and down buttons on the touchscreen | ||
==Software== | |||
* Monoprice makes the [https://www.matterhackers.com/store/l/mattercontrol/sk/MKZGTDW6 MatterControl] software available as a deb | |||
Revision as of 08:21, 1 November 2019
The Monoprice Voxel is an affordable 3D printer using 1.75mm filament. It is said to be a rebranded FlashForge Adventurer 3, which seems plausible from external appearance. I believe it to have "Sailfish" flavored GCode.
The build area is 150mm x 150mm x 150mm. The nozzle diameter is 0.4mm.
It claims to support 3MF, STL, OBJ, FPP, BMP, PNG, and JPG via its slicing software; GX and G are directly supported.
Calibration
- Enter calibration mode using the on-screen display.
- The nozzle will be lowered by the device.
- Fine-tune the nozzle until a piece of paper can just slide underneath it.
- Use the up and down buttons on the touchscreen
Software
- Monoprice makes the MatterControl software available as a deb
