Check out my first novel, midnight's simulacra!
Monoprice Voxel 3D Printer
From dankwiki
The Monoprice Voxel is an affordable 3D printer using 1.75mm filament.
It claims to support 3MF, STL, OBJ, FPP, BMP, PNG, and JPG via its slicing software; GX and G are directly supported.
Calibration
- Enter calibration mode using the on-screen display.
- The nozzle will be lowered by the device.
- Fine-tune the nozzle until a piece of paper can just slide underneath it.
- Use the up and down buttons on the touchscreen
