SDR: Difference between revisions
No edit summary |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
[[File:SDRs.jpg|right|thumb|A few of Your Humble Wikist's toys]] | [[File:SDRs.jpg|right|thumb|A few of Your Humble Wikist's toys]] | ||
On the more ballin' end of things, a tricked-out [https://www.pervices.com/ | On the more ballin' end of things, a tricked-out [https://www.pervices.com/cyan/ Per Vices Cyan] will run you $290k before shipping. | ||
Almost every SDR fundamentally works by receiving electromagnetic energy via metal antennae, running that through an amplifier ("analog gain", done to place the signal in the next stage's sweet spot), and sampling the result using an [https://en.wikipedia.org/wiki/Analog-to-digital_converter ADC]. The latter will have a <i>resolution</i> in bits, and a <i>sampling rate</i> measured in samples per second (or Hz). These samples pass through a [https://en.wikipedia.org/wiki/Digital_down_converter digital down converter] circuit, a low-pass filter, and finally decimation, emerging as a (complex) baseband frequency range, and streaming out as I/Q (in-phase and quadrature) pairs. | Almost every SDR fundamentally works by receiving electromagnetic energy via metal antennae, running that through an amplifier ("analog gain", done to place the signal in the next stage's sweet spot), and sampling the result using an [https://en.wikipedia.org/wiki/Analog-to-digital_converter ADC]. The latter will have a <i>resolution</i> in bits, and a <i>sampling rate</i> measured in samples per second (or Hz). These samples pass through a [https://en.wikipedia.org/wiki/Digital_down_converter digital down converter] circuit, a low-pass filter, and finally decimation, emerging as a (complex) baseband frequency range, and streaming out as I/Q (in-phase and quadrature) pairs. | ||
| Line 26: | Line 26: | ||
| NooElec NESDR<br/>SMArt XTR || E4000 || 2.4 || || 8 || 65–1100<br/>1200–2300 || No || No || USB2A || 0bda || 2832 || $35 | | NooElec NESDR<br/>SMArt XTR || E4000 || 2.4 || || 8 || 65–1100<br/>1200–2300 || No || No || USB2A || 0bda || 2832 || $35 | ||
|- | |- | ||
| | | [https://www.sdrplay.com/rspdxR2/ RSPdx-R2] || MSi001 || 10 || 10.66 || 14 || 1–2000 || No || No || USB2B || || | ||
|- | |- | ||
| SDRPlay RSP1A || | | [https://www.sdrplay.com/rsp2/ SDRPlay RSP2] || || 10 || 10.66 || 12 || DC–2000 || No || No || USB2B || || || $170 | ||
|- | |||
| SDRPlay RSP1A || MSi001 || 6 || || 14 || DC–2000 || No || No || USB2B || || || $100 | |||
|- | |- | ||
| SDRPlay RSPDuo || || 2x10 || 2–10.66 ||14 || DC–2000 || No || No || USB2B || || || $280 | | SDRPlay RSPDuo || || 2x10 || 2–10.66 ||14 || DC–2000 || No || No || USB2B || || || $280 | ||