Hardware detritus

(13 intermediate revisions by the same user not shown)

Line 1:

==Motherboards==

===Extreme4===

* Sensors require the w83627ehf driver

** '''Update:''' as of 2.6.39, this 283627ehf is in mainline, under "Hardware Monitoring"

** Out-of-tree from [http://roeck-us.net/linux/drivers/ roeck-us.net]:

<pre>[skynet](0) $ sensors

coretemp-isa-0000

Adapter: ISA adapter

Physical id 0: +31.0°C (high = +80.0°C, crit = +98.0°C)

Core 0: +23.0°C (high = +80.0°C, crit = +98.0°C)

Core 1: +27.0°C (high = +80.0°C, crit = +98.0°C)

Core 2: +22.0°C (high = +80.0°C, crit = +98.0°C)

Core 3: +28.0°C (high = +80.0°C, crit = +98.0°C)

nct6776-isa-0290

Adapter: ISA adapter

Vcore: +0.96 V (min = +0.00 V, max = +1.74 V)

in1: +1.83 V (min = +0.00 V, max = +0.00 V) ALARM

AVCC: +3.36 V (min = +0.00 V, max = +0.00 V) ALARM

+3.3V: +3.34 V (min = +0.00 V, max = +0.00 V) ALARM

in4: +1.04 V (min = +0.00 V, max = +0.00 V) ALARM

in5: +1.71 V (min = +0.00 V, max = +0.00 V) ALARM

3VSB: +3.44 V (min = +0.00 V, max = +0.00 V) ALARM

Vbat: +3.31 V (min = +0.00 V, max = +0.00 V) ALARM

fan1: 721 RPM (min = 0 RPM) ALARM

fan2: 1243 RPM (min = 0 RPM) ALARM

SYSTIN: +32.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor

CPUTIN: +29.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor

AUXTIN: +25.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor

PECI Agent 0: +30.5°C

[skynet](0) $ </pre>

===[http://www.intel.com/support/motherboards/desktop/dg965WH/ Intel DG965WT]===

* [http://www.openamt.org/ HECI/AMT]. First made public back in 2007, the <tt>heci</tt> driver went into staging as of 2.6.30:

Line 14:

Line 46:

* [[Subversion]] repository: <tt>svn co https://openamt.svn.sourceforge.net/svnroot/openamt openamt </tt>

* I've got some other data on [[Intel 965|i965 video here]]

==Video==

===NVIDIA GTS 360M===

X support on the [[Q1FY10_Core_i7_Laptop_Roundup|GTS 360M]] is, at this time, an ongoing endeavor.

====nvidia proprietary drivers====

The 195.36.08 beta drivers introduced support for the GTS 360M, according to the [http://www.tuxmachines.org/node/43620 2010-03-04 changelog]. These drivers were, however, pulled by nvidia:<blockquote>We believe recent NVIDIA UNIX graphics drivers are affected by a recently reported fan speed issue in 195.36.08 and 195.36.03. Until the problem is resolved, we recommend that UNIX users revert to the 190.53 web release, or the 195.30 public beta.</blockquote>X starts, but is not yet usable. [[CUDA]] is fully supported. The framebuffer console is usable, but low resolution by default.

====[http://nouveau.freedesktop.org/wiki/FrontPage nouveau] drivers====

Using the nouveau 2.6 tree (booting as 2.6.32 and change) and the 0.0.16 userspace, X starts, but is not yet usable. The framebuffer console (<tt>nouveaufb</tt> as supplied by the nouveau driver itself) is high resolution by default.

==NICs==

* [[Direct Cache Access|DCA support]]: Intel 82576 "Kawela", Niagara 2710

* [[Direct Cache Access|DCA support]]:

** Intel [http://ark.intel.com/ProductCollection.aspx?codeName=32418 82576] "Kawela" ([http://download.intel.com/design/network/datashts/82576_Datasheet.pdf datasheet ver 2.41])

** Intel [http://ark.intel.com/ProductCollection.aspx?codeName=26591 82598] "Oplin" ([http://www.intel.com/pressroom/archive/releases/20070928fact.htm rebranded] as Niagara 2710 among others) ([http://download.intel.com/design/network/datashts/319282.pdf datasheet ver 3.1])

* [http://support.intel.com/support/network/sb/CS-012904.htm Identifying your Intel PRO/100, PRO/1000 & 10GbE Network Adapter]

[[Category: Hardware]]

==SATA==

===HighPoint RocketRAID 2640 SAS/SATA Controller===

As of 3.2.0-rc5, there's no driver in the mainline kernel. You'll need build the external driver, which is no longer being maintained by HighPoint (at least as of 2011-12-13). I'm trying to keep it up-to-date; you can check out my <tt>rr2640-freeeeeeedom</tt> tree at GitHub:

* https://github.com/dankamongmen/rr2640-freeeeeeedom

<pre>[skynet](0) $ sudo make install KERNELDIR=~/linux-3.2-rc5

make[1]: Entering directory `/home/dank/linux-3.2-rc5'

CC [M] /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/os_linux.o

CC [M] /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/osm_linux.o

CC [M] /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/div64.o

CC [M] /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/hptinfo.o

CC [M] /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/config.o

LD [M] /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/rr26xx.o

Building modules, stage 2.

MODPOST 1 modules

LD [M] /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/rr26xx.ko

make[1]: Leaving directory `/home/dank/linux-3.2-rc5'

You made a module for 3.2.0-rc5 which does not match current kernel.

The driver will be installed for kernel 3.2.0-rc5.

Deleting previous installed driver module rr26xx...

Install the new driver module...

Removing conflicted driver module...

Updating module dependencies...Done.

Checking for initrd images to be updated...

[skynet](0) $ </pre>

===Intel SSDs===

* Firmware update ISOs can be downloaded [http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/18363/eng/0911036202M388208850.iso&lang=eng&Dwnldid=18363 here]

** That URI will probably not work for you, sigh

Hardware detritus: Difference between revisions

Dank (talk | contribs)

@@ Line 1: / Line 1: @@
 ==Motherboards==
+===Extreme4===
+* Sensors require the w83627ehf driver
+** '''Update:''' as of 2.6.39, this 283627ehf is in mainline, under "Hardware Monitoring"
+** Out-of-tree from [http://roeck-us.net/linux/drivers/ roeck-us.net]:
+<pre>[skynet](0) $ sensors
+coretemp-isa-0000
+Adapter: ISA adapter
+Physical id 0:  +31.0°C  (high = +80.0°C, crit = +98.0°C)
+Core 0:         +23.0°C  (high = +80.0°C, crit = +98.0°C)
+Core 1:         +27.0°C  (high = +80.0°C, crit = +98.0°C)
+Core 2:         +22.0°C  (high = +80.0°C, crit = +98.0°C)
+Core 3:         +28.0°C  (high = +80.0°C, crit = +98.0°C)
+nct6776-isa-0290
+Adapter: ISA adapter
+Vcore:         +0.96 V  (min =  +0.00 V, max =  +1.74 V)
+in1:           +1.83 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+AVCC:          +3.36 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
++3.3V:         +3.34 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+in4:           +1.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+in5:           +1.71 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+VSB:          +3.44 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+Vbat:          +3.31 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+fan1:          721 RPM  (min =    0 RPM)  ALARM
+fan2:         1243 RPM  (min =    0 RPM)  ALARM
+SYSTIN:        +32.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
+CPUTIN:        +29.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
+AUXTIN:        +25.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
+PECI Agent 0:  +30.5°C
+[skynet](0) $ </pre>
 ===[http://www.intel.com/support/motherboards/desktop/dg965WH/ Intel DG965WT]===
 * [http://www.openamt.org/ HECI/AMT]. First made public back in 2007, the <tt>heci</tt> driver went into staging as of 2.6.30:
@@ Line 14: / Line 46: @@
 * [[Subversion]] repository: <tt>svn co https://openamt.svn.sourceforge.net/svnroot/openamt openamt </tt>
 * I've got some other data on [[Intel 965|i965 video here]]
+==Video==
+===NVIDIA GTS 360M===
+X support on the [[Q1FY10_Core_i7_Laptop_Roundup|GTS 360M]] is, at this time, an ongoing endeavor.
+====nvidia proprietary drivers====
+The 195.36.08 beta drivers introduced support for the GTS 360M, according to the [http://www.tuxmachines.org/node/43620 2010-03-04 changelog]. These drivers were, however, pulled by nvidia:<blockquote>We believe recent NVIDIA UNIX graphics drivers are affected by a recently reported fan speed issue in 195.36.08 and 195.36.03. Until the problem is resolved, we recommend that UNIX users revert to the 190.53 web release, or the 195.30 public beta.</blockquote>X starts, but is not yet usable. [[CUDA]] is fully supported. The framebuffer console is usable, but low resolution by default.
+====[http://nouveau.freedesktop.org/wiki/FrontPage nouveau] drivers====
+Using the nouveau 2.6 tree (booting as 2.6.32 and change) and the 0.0.16 userspace, X starts, but is not yet usable. The framebuffer console (<tt>nouveaufb</tt> as supplied by the nouveau driver itself) is high resolution by default.
 ==NICs==
-* [[Direct Cache Access|DCA support]]: Intel 82576 "Kawela", Niagara 2710
+* [[Direct Cache Access|DCA support]]:
+** Intel [http://ark.intel.com/ProductCollection.aspx?codeName=32418 82576] "Kawela" ([http://download.intel.com/design/network/datashts/82576_Datasheet.pdf datasheet ver 2.41])
+** Intel [http://ark.intel.com/ProductCollection.aspx?codeName=26591 82598] "Oplin" ([http://www.intel.com/pressroom/archive/releases/20070928fact.htm rebranded] as Niagara 2710 among others) ([http://download.intel.com/design/network/datashts/319282.pdf datasheet ver 3.1])
 * [http://support.intel.com/support/network/sb/CS-012904.htm Identifying your Intel PRO/100, PRO/1000 & 10GbE Network Adapter]
+[[Category: Hardware]]
+==SATA==
+===HighPoint RocketRAID 2640 SAS/SATA Controller===
+As of 3.2.0-rc5, there's no driver in the mainline kernel. You'll need build the external driver, which is no longer being maintained by HighPoint (at least as of 2011-12-13). I'm trying to keep it up-to-date; you can check out my <tt>rr2640-freeeeeeedom</tt> tree at GitHub:
+* https://github.com/dankamongmen/rr2640-freeeeeeedom
+<pre>[skynet](0) $ sudo make install KERNELDIR=~/linux-3.2-rc5
+make[1]: Entering directory `/home/dank/linux-3.2-rc5'
+  CC [M]  /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/os_linux.o
+  CC [M]  /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/osm_linux.o
+  CC [M]  /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/div64.o
+  CC [M]  /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/hptinfo.o
+  CC [M]  /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/config.o
+  LD [M]  /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/rr26xx.o
+  Building modules, stage 2.
+  MODPOST 1 modules
+  LD [M]  /home/dank/src/rr2640-freeeeeeedom/product/rr2640/linuxls/.build/rr26xx.ko
+make[1]: Leaving directory `/home/dank/linux-3.2-rc5'
+You made a module for 3.2.0-rc5 which does not match current kernel.
+The driver will be installed for kernel 3.2.0-rc5.
+Deleting previous installed driver module rr26xx...
+Install the new driver module...
+Removing conflicted driver module...
+Updating module dependencies...Done.
+Checking for initrd images to be updated...
+[skynet](0) $ </pre>
+===Intel SSDs===
+* Firmware update ISOs can be downloaded [http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/18363/eng/0911036202M388208850.iso&lang=eng&Dwnldid=18363 here]
+** That URI will probably not work for you, sigh