Bambu Carbon X1C: Difference between revisions
| Line 43: | Line 43: | ||
The anti-vibration feet reduced noise and shaking significantly. Some people complain that they're not held in by anything other than friction, but my experience is that if you shove them in hard enough, there's no problem. A PEI plate kept clean will eliminate the glue necessitated by the stock cold plate. Spend the extra $10 for a plate that can be detected by the Carbon; my FYSTEC was $13. The SILESS material went along the bottom and sides. | The anti-vibration feet reduced noise and shaking significantly. Some people complain that they're not held in by anything other than friction, but my experience is that if you shove them in hard enough, there's no problem. A PEI plate kept clean will eliminate the glue necessitated by the stock cold plate. Spend the extra $10 for a plate that can be detected by the Carbon; my FYSTEC was $13. The SILESS material went along the bottom and sides. | ||
==Babo Duo== | |||
The [https://www.themakersphere.com/bambu-lab-storage-box-for-organization/ Babo storage system] is a modular set of drawers, risers, and inserts. | |||
[[CATEGORY: 3D printing]] | [[CATEGORY: 3D printing]] | ||