Bambu Carbon X1C: Difference between revisions
| Line 47: | Line 47: | ||
The anti-vibration feet reduced noise and shaking significantly. Some people complain that they're not held in by anything other than friction, but my experience is that if you shove them in hard enough, there's no problem. A PEI plate kept clean will eliminate the glue necessitated by the stock cold plate. Spend the extra $10 for a plate that can be detected by the Carbon; my FYSTEC was $13. The SILESS material went along the bottom and sides. | The anti-vibration feet reduced noise and shaking significantly. Some people complain that they're not held in by anything other than friction, but my experience is that if you shove them in hard enough, there's no problem. A PEI plate kept clean will eliminate the glue necessitated by the stock cold plate. Spend the extra $10 for a plate that can be detected by the Carbon; my FYSTEC was $13. The SILESS material went along the bottom and sides. | ||
==Major systems== | ===Major systems=== | ||
These will both require some substantial printing. | These will both require some substantial printing. | ||
===Babo Duo=== | ====Babo Duo==== | ||
The [https://www.themakersphere.com/bambu-lab-storage-box-for-organization/ Babo storage system] is a modular set of drawers, risers, and inserts. | The [https://www.themakersphere.com/bambu-lab-storage-box-for-organization/ Babo storage system] is a modular set of drawers, risers, and inserts. | ||
===AMS Hydra Pro=== | ====AMS Hydra Pro==== | ||
This [https://www.printables.com/model/680027-hydra-pro-advanced-bambu-lab-ams replacement of the AMS innards] allows one to use larger spools, along with other advantages. | This [https://www.printables.com/model/680027-hydra-pro-advanced-bambu-lab-ams replacement of the AMS innards] allows one to use larger spools, along with other advantages. | ||
[[CATEGORY: 3D printing]] | [[CATEGORY: 3D printing]] | ||