Bambu Carbon X1C: Difference between revisions
| Line 44: | Line 44: | ||
* FYSETC [https://www.aliexpress.us/item/3256806332585237.html PEI plate] | * FYSETC [https://www.aliexpress.us/item/3256806332585237.html PEI plate] | ||
* SILESS [https://www.amazon.com/Siless-Black-sqft-Sound-Deadening/dp/B0CXNJM8P1 VIBRO 2mm] sound deadening mat | * SILESS [https://www.amazon.com/Siless-Black-sqft-Sound-Deadening/dp/B0CXNJM8P1 VIBRO 2mm] sound deadening mat | ||
* 3dMachinist's [https://www.etsy.com/listing/1460463476/bambu-power-tap-v13-kit Power Tap Kit v1.3] | |||
The anti-vibration feet reduced noise and shaking significantly. Some people complain that they're not held in by anything other than friction, but my experience is that if you shove them in hard enough, there's no problem. A PEI plate kept clean will eliminate the glue necessitated by the stock cold plate. Spend the extra $10 for a plate that can be detected by the Carbon; my FYSTEC was $13. The SILESS material went along the bottom and sides. | The anti-vibration feet reduced noise and shaking significantly. Some people complain that they're not held in by anything other than friction, but my experience is that if you shove them in hard enough, there's no problem. A PEI plate kept clean will eliminate the glue necessitated by the stock cold plate. Spend the extra $10 for a plate that can be detected by the Carbon; my FYSTEC was $13. The SILESS material went along the bottom and sides. | ||
The Power Tap Kit accepts a 6-pin AMS cable, and bridges it to a 6-pin AMS output plus a 24V female barreljack. This allows you to easily break out the 24V line for external power consumption. You could just cut the AMS cable, add two splitters, and solder/hotwrap everything back together, but this is a nice, clean PCB in an attractive box, for $9. | |||
===Major systems=== | ===Major systems=== | ||