Check out my first novel, midnight's simulacra!
ARP
The Address Resolution Protocol (ARP) provides IPv4 hosts within a broadcast domain with a means to discover what (if any) other host owns a network address. It is replaced by the Neighbor Discovery Protocol in IPv6.
Arp packet types
This nomenclature comes from RFC 3927, which specifies all-zero destination hardware addresses for broadcasting. All-ones is more common.
- ARP Announcement -- Source and destination network address are equal. Destination hardware address is all zeros. Source hardware address is the sending station's MAC.
- Used to claim an address in LLMNR for zero-configuration networking
- ARP Probe -- Source network address is all zeroes, as is destination hardware address. Source hardware address is the sending station's MAC. Destination network address is the address being probed.
- Used to check address suitability for LLMNR in zero-configuration networking
- Gratuitous ARP -- ARP for which there was no request
- Inverse ARP -- Opcodes 8 and 9 allow for Inverse ARP: "I know this hardware address; what's the physical address?"
- Reverse ARP -- Opcodes 3 and 4 allow for Reverse ARP: "I know my hardware address; what's my physical address?" Replaced by DHCP/BOOTP.
Linux ARP states
These are encoded in the ndm_state bitmask of a RTM_NEWNEIGH/RTM_GETNEIGH netlink message (valid ndm_flags values include NTF_PROXY for proxy ARP entries and NTF_ROUTER for IPv6 routers).
| state | meaning | transitions |
|---|---|---|
| permanent | never undergoes verification or expiry | none (manually configured) |
| noarp | normal expiration, never verified
"A device with no destination cache" |
use resets use counter |
| reachable | normal expiration | use resets timer |
| stale | still usable, needs verification | use resets timer and returns to reachable
timer changes state to delay |
| delay | schedule ARP request, needs verification | use resets timer and returns to reachable
timer changes state to probe, issuing ARP request |
| probe | need ARP reply for verification (reprobing) | use resets timer and returns to reachable
timer reissues ARP requests or moves to failed |
| incomplete (new entry) | need ARP reply for first use | use resets timer and returns to reachable
timer reissues ARP requests or moves to failed |
| failed | no response received / invalid cache entry | timer governs reissuing of ARP requests
use resets timer and moves to reachable |
See Also
- Linux's rtnetlink(7) man page
- "The ARP State Machine" James Westall's CpSc 853 "Protocol Implementation" class notes
- "2.1 Address Resolution Protocol (ARP)" Martin Brown's "Guide to IP Layer Network Administration with Linux"
